Parts Vendors: LC Meters

Displacement Meter - Models

Positive Displacement Meters are classified according to their material of construction.

	M-5 Aluminum Aluminum meter housing. Maximum nominal flow rate is 60GPM (227LPM)
	M-7 Aluminum Aluminum meter housing. Maximum nominal flow rate is 100GPM (380LPM)
	M-10 Aluminum Aluminum meter housing. Maximum nominal flow rate is 150 GPM (550 LPM)
	M-15 Aluminum Aluminum meter housing. Maximum nominal flow rate is 200GPM (757LPM)
	M-25 Aluminum Aluminum meter housing. Maximum nominal flow rate is 300 GPM (1,136LPM)
	M-30 Aluminum Aluminum meter housing. Maximum nominal flow rate is 350 GPM (1325LPM)
	M-30 Cast Iron Cast Iron meter housing. Maximum nominal flow rate is 350GPM (1,325LPM)
	M-40 Aluminum Aluminum meter housing. Maximum nominal flow rate is 450GPM (1,700LPM)
	M-60 Aluminum Aluminum meter housing. Maximum nominal flow rate is 600GPM (2,271LPM)

TOP

	FS-Series \| FSAA-Series \| FSA-Series 2", 3", 4" and 6" sizes, made of steel
	Bottom inlet, side outlet, vertical, right-angle flow. FS-Series 2", 3", 4" and 6" sizes, made of steel
	F-7 Strainer Aluminum for M-5 and M-7 Meters
	F-7 Strainer 2" (1 1/2" optional) 150 PSI, choice of cast iron or stainless steel for M-5 and M-7 Meters
	F-7 Strainer 2" (1 1/2" optional) 350 PSI, high pressure aluminum for MA-5 and MA-7 Meters
	F-15 Strainer 3" 350 PSI, aluminum for M-15, and M-25 Meters
	F-30 Strainer 4" (3" optional) aluminum for M-30, M-40 and M-60 Meters

TOP

Designed specifically for refined fuel delivery truck applications (2")

Designed specifically for refined fuel delivery truck applications (3")

TOP

	Bulk Plant Air Eliminators Installed on upstream side of the strainer and as close to the pump outlet or unloading connection as possible. Available in sizes 3", 4", 6" and 8" ANSI flanged.
	Steel Air Eliminator For use with MS-, MSAA-, and MSA-Series steel case Meters.
	High Pressure Aluminum Air Eliminator For use with 350 PSI, MA-4, MA-5, MA-7 and MA-15 Meters.
	Aluminum Air Eliminator For use with M-5, M-7, M-10, M-15, M-25, M-30, M-40 and M-60 Meters.
	Cast Iron Air Eliminator For use with M-7 Meters.
	Stainless Steel Air Eliminator For use with M-5 and M-7 Meters.

TOP

For M-5, M-7 and M-10 Meters

For M-15 and M-30 Meters

For MS-, MSAA-, and MSA Series

TOP

	Differential Valve This Basic Diaphragm Style Valve is spring loaded and designed to fail closed.
	Air Activated/Differential Check Valves For use with M-7, M-10, M-15, M-25 and M-30 Meters.
	Spring Loaded Check Valves Provides back pressure to increase air/vapor eliminator efficiency and to prevent reverse flow.
	Back Check Valve Designed with a soft seat to prevent reverse flow and eliminate counter advancement when PTO is engaged.
	Model 119-2 Air Check Valve or Vapor Activated Differential Valve for use with all MS, MSA & MSAA series meters.

TOP

	Victaulic Spools Used in aircraft refueling installations.
	Elbows Elbows are provided for M-5 and M-7 Meters to increase mounting flexibility of the Meter and accessories.
	Flanges For use with all M-series meter and accessories.
	Thermowells Thermowell assembly for mechanical TVC's are available for all aluminum M-Series Meters in 2", 3" and 4" pipe sizes.

TOP

	Large Numeral Counter (Register) A Large Numeral Counter records the amount of each delivery or batch and provides a five digit resettable totalizer and an eight digit non-resettable totalizer.
	Large Numeral Counter (Register) with Ticket Printer Printer provides an imprinted ticket record of the transaction.
	Swivel Permits rotating counter or counter printer as desired throughout a 360° range.
	Non-Reset Counters This Counter provides registration of the cumulative total only.
	Gear Plate Since all conversions are made with easily accessible gears, this greatly simplifies changing units of measure.
	Register Stack Adapters For use when installation of a meter in a vertical line is preferred over the standard horizontal mounting.
	Extensions When required by the installation, an extension provides a means of elevation and separating the register stack from the meter for ease of viewing.
	External Drive Modules A modular housing element, driven by the Meter on which may be mounted various assemblies to serve a variety of purposes.
	Mechanical Rate-of-Flow Indicator Direct reading dial accurately shows rate-of-flow through meter to within 1% at full scale reading.
	Hot Oil / Steam Jackets Permits circulation of hot oil or low pressure steam to maintain product temperature within the metering chamber.
	UL Listed Recognized Component LC MA4/MA-5 Meters now available with Neptune®-style elbows for easy, cost effective total interchangeability.